this is a major problem currently in the world of camping.
mainly because the conversations are massive interfere with something you find it is becoming very widespread, and it is very almost mistaken for a leak.
leaked a while these days of very, very waterproof, it is very unlikely that they have been disclosed admits that there will be occasional problems when you have a real leak but probably condensation is 90% – 99 % of the time. Actually this due to humidity or water inside the attempted.
so, the principle is really because we now use more fabrics that would like expect durable and certainly easier to faster and drier.
so, it’s just basically makes things a lot simpler if you got a wet tent, you could dry it faster.
what is fundamentally the customers and us as retailers want to get out of the tent to sell.
something that is faster and easier, and it is you see it certainly with inflatable tents like this here.
in the past years, it has been absorbing polyester, poly-cotton material, which is naturally breathable as well as raincoat.
so, the joys are when you get humidity in tents naturally on us, opens through heat let air pass-through it is much cooler inside. It helps again with condensation.
condensation may occur whether someone is in a tent or not. just brings you down to temperature change outside and even less when we inside a little and exhaling the materials we use now look more like polyester, so it is a non-breathable material on which they put a PU coating make waterproof.
the problem with that, as I said, it becomes very waterproof and, in some cases, when you can take something like this kind of him is hard 6000 mils close the head for this particular tent, therefore essentially what this means is that they put a material down put around sitting on top fill the water until they get three pins or drops of water fall through and that is when they define what is waterproof it so that it can take six meters of water put under pressure on this material.
The Department of Defense classifies waterproof as approximate or seven eight hundred six thousand meters you said astronomically raincoat but like I said, it’s not them breathing so the problem is even though what will not come in humidity is not going out.
so, when you find yourself here again with the tempo change you find the windows how I sort to have missed it or there are droplets along the roof that goes down purely condensation is not really water coming through the tent itself.
what do you it’s when you have a lot waterproof material like this, they also need to put it together and therefore so they make holes sew holes in what they are doing now you are going to make this waterproof do they heat weld the seams they put on a clear heating tape while the joined and this prevents the water from coming in.
a person will, in fact exhale in a night’s sleep a pint of water, so you are talking about five hundred and sixty milliliters ago there are around, and so it is a lot of water, your exhale apply overnight to sleep.
I mean a 500-milliliter bottle of water so a person alone in a night’s sleep in any tent, I’m good to breathe out bats.
So wear mine, these are eight-man tents and you can have eight people inside by about would say six people for six beautiful beds in the back, and the six people asked about a little more free liters of the water. a lot of water just one single night and that’s why again using non-breathable materials make even more noticeable condensation.
Now because we have zoning groundsheets which is still a beautiful thing and it’s something that makes a lot of camping more than a luxury process of luxury items for.
Do like you everyone really wants, and this essentially intensifies, and you make it more visible condensation and you find more water in your tent these days because it’s has nowhere to escape.
Years ago, when we start the material if you discerning the groundsheet is like a water would literally come finalize the point, then exit the tent because it is only in the groundsheets.
Now he collects it remains, and it is a lot more notable and as said the water would be always naturally try to find the lowest so point when you find something like.
this is a faithful tent naturally what you will find that he will try to get to the lowest point for you to notice you find it around the base of the beams as it is lowest points or again he will try and drip the point of suspension, so never lanterns rooms pull anything, so he won’t actually try and come and find the land.
one thing manufacturers are now trying to do to overcome the problem is that they put more ventilation panels in you see it more in the new tents.
you mainly get along just to give air circulation to try and keep it as cool and how the condensation as possible.
now the tents have passed always had a ventilation panel above the bedroom. it’s always the case now, but still, as I said with sewn into sheets of soil moisture is trap even more, than it was last or ten years.
so this is where you know something like the ventilation panels on the sides are a primordial absolute that you have opened it even if it is a cold day because that’s just going to help with condensation.
Many tents leak by accidentally touching them from the inside.
This phenomenon can be extremely annoying, although there are explanations and a few ways to solve the problem.
There are two main factors that keep water from coming out of your tent: hydrostatic head and surface tension.
While “HH” is a characteristic of the tent, surface tension is simply the reason water forms a mass of droplets which cannot pass through the pores of the fibers.
However, when you touch the tent from the inside, you increase the chances of breaking this surface tension, leaving the hydrostatic head as the only water repellent.
The best way to overcome this problem, in my opinion, is to limit the occupied interior space. For this, you can use a sleeping pad instead of a large mattress.
A different approach would be to get a larger tent, maybe 1 to 2 people larger. This way, you decrease the chances of hitting it by increasing the potential space.
Well, that would be it. I hope my article raised some solutions and answered your questions.